• Altec Lansing Bluetooth Speaker Manual Imw577
• Altec Lansing Bluetooth Speaker Manual Youtube
• Altec Lansing Bluetooth Pairing Instructions
• Altec Lansing Bluetooth Speaker Pairing Instructions

Rock out solo or with friends using the Altec Lansing Mini LifeJacket Jolt Bluetooth Speaker, which lets you wirelessly stream from enabled devices and link to other Mini LifeJacket Jolt speakers to create a surround sound listening experience. First and last name. Only your first name and last initial will be shown, e.g. “Jeff C.” Email address. We won’t share you email address with anyone else. Headline. The title of your review, e.g.

Student-Contributed Wiki

An awesome student from our education program made this wiki. It is not managed by iFixit staff.

This troubleshooting page will help you diagnose problems with the Altec Lansing BoomJacket.

Speaker Will Not Turn On

The speaker will not respond or show any sign of powering up.

Ensure the power adapter is plugged in and the charge light is on. If the light is not on, and the adapter is plugged in, the adapter is faulty or the speaker is fully charged. Consider purchasing a replacement adapter.

If the power adapter is plugged in, and the light on the adapter is on, make sure the adapter is connect to the speaker. If the speaker only powers up when the adapter is plugged in, regardless of charging time, then the battery is faulty. Replace the battery.

If the power adapter is plugged in, and the light on the adapter is on, make sure the adapter is connect to the speaker. If the speaker still does not powers up when the adapter is plugged in, regardless of charging time, then the power button might be faulty.

Speaker Powers Off On Its Own

The speaker will turn on or off randomly without you physically turning it on or off.

If the power adapter is plugged in, and the light on the adapter is on, make sure the adapter is connect to the speaker. If the speaker still does not powers up when the adapter is plugged in, regardless of charging time, then the power button might be faulty.

Volume Rises and Lowers On Its Own

If the speakers volume changes with out you pressing on the on the volume button to increase or decrease the volume

If the speakers volume changes with out you pressing on the on the volume button to increase or decrease the volume then the power/volume button may be faulty.

Audio is Distorted

The audio either cuts in and out or is very scratchy sounding.

Test audio using the Bluetooth feature, then test it using the auxiliary cord. If the audio is only distorted while listening via the auxiliary cord, the audio jack or the auxiliary cord may be faulty. Audio that cuts in and out is often a sign of a loose audio jack, so make sure the audio jack is fully inserted in the speaker.

A conflicting signal may be responsible for connectivity issues. Consider turning off nearby wireless devices and reconnecting the device you are using. If the problem continues the Bluetooth board may need replacing.

Audio Will Not Play

Audio will not play even though the speaker is turned on.

A conflicting signal may be responsible for connectivity issues. Consider turning off nearby wireless devices and reconnecting the device you are using. If the problem continues the bluetooth board may need replacing.

Test audio using the Bluetooth feature, then test it using the auxiliary cord. If the audio is only distorted while listening via the auxiliary cord, the audio jack or the auxiliary cord may be faulty. Audio that cuts in and out is often a sign of a loose audio jack, so make sure the audio jack is fully inserted in the speaker.

If the speakers volume changes with out you pressing on the on the volume button to increase or decrease the volume then the power/volume button may be faulty.

Student-Contributed Wiki

Altec Lansing Bluetooth Speaker Manual Imw577

An awesome student from our education program made this wiki. It is not managed by iFixit staff.

This troubleshooting page will help you diagnose problems with the Altec Lansing Mini Lifejacket 2, identified by model number IMW477.

Device won't connect via Bluetooth

The speaker will not connect to any devices through bluetooth.

Make sure the hardware and software are working properly by making sure they connect when prompted. If the audio source says that it is not compatible then turn the device off in order to reset the bluetooth on the receiving device.

Make sure that the speaker is in discoverable mode, denoted by the blinking blue light on the front of the device.

Make sure the speaker is within 30 feet of your bluetooth device when attempting to connect.

If your speaker was successfully paired but the connection is failing, make sure that the speaker is within 30 feet of your bluetooth device and no large objects or walls are obstructing it. Try to unpair the devices, then reconnect them.

If the device seems to be functioning normally but refuses to pair with other devices, the bluetooth antenna may not be receiving a signal. In this case, you may wish to follow our circuit board replacement guide.

Device won’t charge/turn on

The speaker will not charge or turn on.

Check if the speaker is charging when you plug it through the charging port, denoted by a steady red light located at the center of the speaker. If the speaker is not charging there may be a problem with the charging port or the power cable. Try a different power source or a different cable. If the problem persists, consider replacing the charging port using our back panel replacement guide.

If the device appears to be charging but won’t turn on, the battery may be dead. To replace the battery, follow our battery replacement guide.

Device emits strange sounds

The speaker emits buzzing, distortion, or hissing sounds.

A possible reason for the device emitting weird sounds could be because the volume is too high. If that is the case, you are hearing an audio pop which occurs when the sound is too high. Adjust the volume in this case. Another possibility is that the audio itself is faulty. Check the audio quality on another device to make sure it is alright.

The wireless range of the device is 30 feet. To avoid audio disruptions, place the speaker within the range of the device it is connected to. If it emits distorted sounds such as static or fuzz, make sure that there is no large object in between the speaker and the device it is connected to.

If the device continues to emit strange sounds, check the signal through both bluetooth and the auxiliary cable. If both are working properly and the problem still exists, then the speaker may be faulty and needs to be replaced. In this case follow the link to below to check out our speaker replacement guide.

Device loses charge quickly

The speaker’s battery won’t hold charge for the advertised 10 hours.

Altec Lansing Bluetooth Speaker Manual Youtube

To check if your device has a faulty battery unplug it and see if it stays charged for a prolonged period of time. If the device does not stay charged then you may have a faulty battery. To replace the battery, follow our battery replacement guide.

Altec Lansing Bluetooth Pairing Instructions

When the device is fully charged make sure to unplug it from the charging source. The battery’s lifespan could be shortened if overcharged multiple times.

Audio won’t play when device is turned on

The speaker is powered on, but won’t play audio.

Android emulator download windows 10. Download Owl Bird Simulator for PC/ Owl Bird Simulator on PC. Goat Madness lets you surf the skies and catch the owl with its very own classic owl simulator. Download Owl Bird Simulator for PC and get the same Android experience as you navigate the splendid forests for a fabulous meal. Android simulator free download - Fortnite, Android 6.0 Marshmallow, Kingo Android Root, and many more programs.

Make sure your audio source is not muted and its volume is up. Press the + button on top of the speaker to increase its volume.

Check to make sure your bluetooth device is turned on and is discoverable. A blinking blue light on the front of the speaker means it is ready to make a connection. A steady blue light means the speaker is paired. Make sure the speaker isn’t already connected to a different device.

If the speaker won’t play audio through the 3.5mm auxiliary port, the cable may be faulty. First, test the speaker’s connection through bluetooth, then through the auxiliary port. If the problem is only present in the auxiliary port, make sure that both ends of the cable are properly connected. If possible, test the connection with a different 3.5mm cable. If a new cable does not fix the issue, the auxiliary port itself may be defective.

Altec Lansing Bluetooth Speaker Pairing Instructions

If the issues stated above do not help, then the fault may be with the speaker. Symptoms of a faulty speaker may be very quiet or muffled audio, or none at all. In that case, the speaker will have to be replaced. You can do this by following our speaker replacement guide.